FAR: Changing Tides Sawmill and Railway Guide | Repair Tool and Steam Core

The sawmill's first lever breaks. Push the log platform to the far right, use the left platform's lever to position the log, and cut it with the blue button. Pull the platform holding half a log left, then climb from the log to the repair tool upstairs.

1. Carry the tool back to the broken lever.
2. Repair until the smoke disappears, then pull the lever.
3. Return aboard with the tool.
4. Raise the sail after passing beneath the sawmill.

Lower the mast to avoid the railway roof. Swim right beneath the submerged tanker, then use a box to reach the furnace room. Add fuel, start the engine with the upper button and bellows, and carry fuel from upstairs.

Set the train's direction lever right and start the furnace to couple the right-hand wagon. Then switch the lever left and return to the far left.

1. Press the blue button on the wagon's funnel-shaped device.
2. Lower the core to the ship.
3. Carry your remaining fuel aboard, too.
4. Push the core into place at the ship's front.
5. Use steam to push the tanker and depart.